|
Translations provided by a grant
from: Frame
Tek
FRM-396 Determining Frame
Allowance
Outlines the importance of having a frame allowance
and the various factors to be considered in determining
that allowance. Terminology, recommended definitions
and mandatory practices are included.
FRM-397 Ordering Frames &
Chops
This standard is a companion to Determining
Frame Allowance. Its purpose is to establish a common
terminology and practice for figuring, measuring, ordering
and cutting chops. As a universal standard, it provides
accuracy and precise communication, decreasing the chance
of error. It also provides detailed descriptions, including
diagrams of how to measure, define and order both frames
and chops. An inch to millimeter conversion table is
included.
FRM-398 General Picture Framer
Requirements
This guide outlines the basic knowledge and
experience necessary for a general picture framer. It
includes minimum standards only, which are intended
to act as broad guidelines. It has a dual purpose: to
inform framers of the many technical and preservation
concerns in the practice of picture framing, and to
inform the public as a consumer when working with a
picture framer.
FRM-399 Hanging Artwork by
Cord or Wire
This guide examines the problems that may occur
when hanging framed artwork with a flexible wire or
cord hanging system and recommends solutions.
FRM-400 The Goldenmean For
Proportional Divisions
This guide provides the information and formula
that occurs in nature. When applied to an area, that
area can be divided into visually balanced unequal proportions
that were visually pleasing to the eye.
FRM-2000 Standard Guide
for Maximum Preservation Framing
Francais | Deutsch
| Español
This standard guide has been developed with the
aim of preventing damage and providing maximum preservation
when framing art and keepsakes. This document includes
standard terminology and definitions, mandatory and
recommended procedures and materials, spacing and fitting,
hanging and display options, and recommendations for
periodic maintenance.
GEN-1997 A System for identifying
and locating any area within any given parameters
This document was develop as a universal method
of locating a specific area on any flat surface, by
dividing that surface into individual areas which may
be divided again and again until desired size of the
location is established. A method that can be easily
and accurately established, located, recorded and communicated.
GEN-1998 Taking, Recording
and Communicating Dimensions
The purpose is to establish a universal method for identifying
size and the vertical and horizontal orientation of
artwork. A method of recording dimensions that clearly
indicate the vertical, horizontal and thickness of the
item.
GLZ-2000 Glazing of Artworks
and Keepsakes
This establishes the minimum standard for the glazing
of artworks, keepsakes and the like.
GLZ-2001 Standard for Preservation
Glazing Materials
To establish a standard quality guide for those
non-visual glazing characteristics not easily recognized
by the end user. To establish the minimum percentage
for any glazing glass or acrylic to be recognized as
having increased UV blocking and or increased anti-reflective
qualities.
PMMB-2000 Permanence
in Paper, Mat and Mounting Boards
Francais | Deutsch
| Español
This standard guide to permanence in mat and mounting
boards identifies the composition and characteristics
required for permanence. The Expanded Guide includes
Definitions & Terminology.
TEX-1999 Textile Fiber Properties
|
